512DH+ LCD Screen Laser Repair Machine
- General Details
- Specification
- Inquiry
The laser machines are used for various brand of TV repairing; the function of the machine is ITO circuit repairing. Which can solve the problem of COF fault lines, scorching (this problem also can be repaired by a bonding machine), ITO circuit break line, short line, bright line, half-bright line, spot line, multiple line. Laser machine have the advantages of high efficiency, high repair rate, and low cost (no need change parts like COF and other consumable).
Principle Of Laser Machine ?
LCD screen laser repair equipment parameters
Size:
1660mm×1230mm×1700mm (according to the actual design)
Weight:
450KG
- Applicable LCD panel sizes maximum 50, 100 inches or customized (orbital platform can be expanded)
- Point (3um X 3um), Line (L 50um X 3um), Blocks (50um X 50um) Patch
Repair fog polarizing film of the LCD panel
- Electronic shutter red light and red box dual display
- Shutter size?lens multiplying power and laser power parameters are stored and selection
- Power supply 220V, 30A
- No fuse protection circuit breaker protection
- Operating ambient temperature 20 ? ~ 30 ? + / – 5 ?
- Operating ambient relative humidity65 ±5 ?RH
Laser systems:
Control system from research and development
Type of laser :
ND-YAG LASER
Wavelength :
1064 / 532nm dual wavelength (532nm in order to adjust the wavelength of the optical axis)
532nm wavelength for the adjustment of the optical axis
Way of cooling:
Water-cooled
Laser power:
3?8mJ/Pulse
Oscillation frequency:
1 ~ 20 Hz / sec
Maximum peak power:
1mW
1064 Volatility:
8 ~ 6 nsec
Energy output control:
512steps for 0-100% Hi / Low switch-able
Flash Lamp Life Time:
- 1 year or greater than 1000000 shots
Laser oscillator Warranty:
1 year
The actual laser specification prevail
Processing stage and X/Y/Z-axis drive system
Working platform size:
1250 mm X 900 mm
Stage material:
Grinding optical glass platform
Stage base:
Confidential steel base
X/Y axis effective stroke:
1250 mm X 900 mm
X/Y axis drive form servo motor system X/Y axis drive form servo motor system collocation
X/Y axis minimum resolution:
1um/pulse
Reproducibility:
Less than or equal 5 um
Z axis maximum effective stroke:
100mm
Z axis drive form servo motor system X/Y axis drive form servo motor system collocation confidential screw
Z axis minimum resolution:
0.1um/pulse
In the actual design configuration prevail
Optical Imaging System
Microscope/laser processing special type:
CCD 1/2”color CCD
Episcopic light source:
Halogen light source system of high brightness (100W)
Transmission light source
Halogen light source system of high brightness (150W)
Guide Light :
Halogen light source system of high brightness (100W)
Objective lens switching system 4 holes/Electric switchable type(linear)
Precision lens group 5 times/10 times/20 times/50 times/
(the latter two with observer/laser processing function)
M PLAN APO 5 x Observation
M PLAN APO 10 x Observation
M PLAN NIR 20 x Observation/laser processing
M PLAN NIR 50 x Observation/laser processing
Auto focus system
Focus Type:
Manual Focus
Shock Absorbers system
Shock form:
Gas pressure shock absorbers
Natural frequency (vertical / horizontal) :
2 ~ 2.3 Hz
Manufacturers supply specifications 4 ~ 6 kg / ? (Compressed or Nitrogen Gas)
(Floor earthquake Level of equipment need) :
B Grade
ATS LR2200M using in SEMI standard vibration spec V.C.B. as below .
Should meet the following condition even when operating surrounding equipments
Laser slit
Repair size:
7-65 inch
Spot repair:
Min: 3um * 3um
OS?
Windows system
HD?
500G*1
RAM?
2G
Language?
Simplified Chinese/English
Monitor?
19”monitor
Key board?
ATS-standard
Mouse?
ATS-standard
Operating mode
Software features
- (1) Laser Mode operation function
Provides Point / Line / Block three kinds of laser processing mode, the laser parameters of recipe, according to user teaching pre-patched path and type on the screen, for a one-time quick fixes after teaching.
- (2) Manually operated laser firing functionality
- (3) Recipe Archive feature
Provides information on laser parameters / substrate parameters Recipe Archive feature
(4) User login / logout (rights management)
(5) Up and down manually adjust the light source
(6) Up and down light coordinate each multiplying power setting automatically adjusts
(7) Basic measurement tools
(8) Image Archive feature
(9) The lens switches auto-correction feature
(10) Image parameter setting function
- brightness setting
- contrast setting
- saturation setting
- contrast setting
(11) Operating language selection
- Traditional Chinese/Simplified Chinese
- English
Utility Equipment
Power 3 phase / AC 220 V ± 10%, 30A
Power connector M6 terminal block
Ground wire JIS grade 1, 8mmsq above
Using environmental:
Temperature 20-26C
Humidity 30-70 %( No dew drop is allowed)
Clean level class 10,000
Warranty Period
12 months after acceptance provides warranty service (excluding consumption of spare)
Work efficiency
Staffing:
A group four people (according to standard workshop prevail
Personnel division:
1 screening, 2 people looking for point identification, one operate the machine
Tools needed:
2 optical microscopy
Personnel allocation:
1 person screening, 2 looking for point identification, one person operate the machine
Tools needed:
Optical microscopy 2 set
Repair the fault and the standard output (use 32-inch LCD panels as an example)
ITO failure:
1 line of 500 pieces, 3 lines or more of 400 pieces
Short circuit line:
Less than 3 lines of 350 pieces
Working hours:
Two work shifts, the average work of 8 Hour
Specific production according to worker skill level shall prevail
NOTE preparation ?
Different models in the control system and laser system parameter will be some relatively
changes ?specific programs can be noted in the customization process.